Skip to content

Septic Servicing & Repairs in Dayton, TX

Septic system servicing and pump repairs for homes around Dayton, Liberty, Crosby and Baytown. On an aerobic system, most trouble comes down to a few parts. We find which one, explain it plainly, and fix it.

Person in jeans and boots holds a muddy black pipe with cables over grass

The parts we fix most

Control panels, aerators and tank pumps keep an aerobic system running. Here’s what each one does and how to tell when it’s in trouble.

Control panels

The electrical box that runs the system. It switches the pump and air pump, times the spray, reads the floats and sounds the alarm.

Signs it’s failing

  • Alarm or red light that won’t reset
  • A breaker that keeps tripping
  • Pump not cycling
  • Corrosion, moisture or ants in the box

How we handle it

We test the electrical parts and find the fault. When a panel needs replacing, we mount the new one on the house or on treated 4x6 lumber, never on the ground.

Aerators (air pumps)

The aerator runs all the time, feeding oxygen to the bacteria that treat your wastewater. Without it, treatment stops and odors start fast.

Signs it’s failing

  • No hum from the air pump
  • No bubbling in the aeration chamber
  • A sewage smell instead of a chlorine smell
  • An aerator alarm

How we handle it

We keep aerators in stock, so a replacement usually doesn’t mean waiting on a part to come in.

Tank pumps, floats and alarms

The pump sends treated water from the pump tank out to the spray heads. Floats tell it when to run, and the alarm warns you when the water gets too high.

Signs it’s failing

  • High-water alarm
  • Spray heads not running, or running too often
  • Soggy ground near the tanks
  • Backups in the house

How we handle it

Septic pumps can’t be rebuilt, so a failed pump gets replaced, and we replace the float along with it. We install Mid Suction pumps.

What happens on a service call

We don’t guess, and we don’t upsell.

  1. 1

    Diagnose

    We test the electrical parts, check that the pump runs, inspect the floats and controls, and look for water getting in where it shouldn’t.

  2. 2

    Explain

    We show you what failed and why, and tell you plainly what it’ll take to fix.

  3. 3

    Repair

    We fix the root cause, not just the symptom.

  4. 4

    Test

    We run the system through its cycle and check the alarm before we leave.

Before you call

A few quick checks can save time, and sometimes a trip:

  • Silence the alarm at the panel, but leave the power on
  • Cut back on water: hold off on laundry, long showers and the dishwasher
  • Check the breaker for the septic system
  • Note which lights are on at the panel
  • Think back: heavy rain or a power outage lately?

Brands we work on

We service many aerobic brands, including Hoot, Clearstream, Norweco Singulair, Jet, Delta, Southern, Multi-Flo, Nayadic, Aqua-Safe and Whitewater.

Don’t see yours? Call and ask.

Questions homeowners ask

Plain-language answers, not legal advice. Your county or other permitting authority has the final word for your property. More answers on our FAQ page.

What should I do when my alarm goes off?
  • Silence the alarm at the control panel (don’t turn off the power unless you’re told to).
  • Stop or cut back on water use: no laundry, long showers or dishwasher.
  • Check the breaker for the septic system.
  • Look for obvious causes, like recent heavy rain or a power outage.

If it doesn’t reset, or you’re not sure, give us a call.

What does a red light mean?

Usually high water, a pump problem or an overloaded system. Exact meanings vary by manufacturer, so check the label on your control panel.

Can I repair a septic system myself?

You can check breakers and silence alarms, but most repairs need a professional. Pumps, floats, aerators and electrical parts have to be diagnosed properly to avoid damaging the system.

What if it’s an emergency?

Some emergency repairs (lids, risers, inlet and outlet fittings, disinfection devices) can be made right away, but they must be reported to the permitting authority in writing within 72 hours.

The county says my system is malfunctioning. Is there a deadline?

Yes. Your permitting authority sets deadlines to fix a malfunctioning system. Call us as soon as the notice arrives.

Alarm going off?

Silence it, cut back on water, and give us a call. We’ll find out what’s wrong and explain it in plain words.

(936) 258-3080 Or send us a message

Mon–Fri, 8:00 AM – 5:00 PM